Glaze Tech - 240V. 1ph. Electronic Kiln

Description

Skutt Ceramic Kilns 

KM Glaze Tech - 240 volt Skutt Electronic Kiln

Chamber Size:  Approximately 15 in. x 15 in. opening and 9 in. high: 1.1 cubic feet

The Perfect Cone 10 Test Kiln

Most high fire test kilns on the market are either too small or underpowered because they are trying to run on 120V instead of 240V. With a little extra wiring you can have a test kiln that truly fits your needs.

Brand New Controller

The Glaze-Tech now has a brand new controller that allows you to fire Glass and Ceramics. It even has built in programs for Precious Metal Clay. The perfect controller for any of your testing or other small firing needs. Here is what you get:

·      Glass Fire Mode allows you to write a program simply by choosing your technique and the speed. It’s that easy!

·      Cone Fire Mode allows you to fire Ceramics simply by entering the Cone Value, Firing Speed and Hold Time.

·      PMC Mode is even easier. All you enter is the type of Metal Clay you are using and press start.

·      Write your own firing programs with up to 8 Segments using Ramp and Hold. Now you can store up to 5 programs.

·      Adjust temperatures or hold times while the kiln is firing using Add Time or Add Temp or simply select Anneal Now to set your project and begin annealing it.

The Right Size, the Right Power, and the Right Control

When you are testing glazes, you want to mimic the real world which means you need a kiln that can perform like your big kiln. It needs to be wide enough to test multiple samples, tall enough to test glazes on a vertical surface, powerful enough to match the firing profiles you will use in real life and have the control to match those profiles on the heating and cooling side of the profile. The Glaze-Tech was designed to do exactly those things.