Nimbus - 16 oz Mayco Stoneware Glaze
- Brand: Mayco Colors
- Product Code: SW194-16oz
- Availability: In Stock
Description
SW194 NIMBUS STONEWARE
cLASSIC gLAZE
Cone
6: Nimbus
is a glossy, opaque, variegated blue glaze that breaks over texture and has an
iridescent sheen. Blue micro-crystallization may develop.
Cone
10: Glaze
brightens to a variegated cyan that breaks green/brown over texture.
TIP: This glaze is highly fluid at 3 coats.
Anticipate glaze movement with receded application on vertical surfaces to
prevent unwanted running. Prone to pinholes when fired on manganese clay bodies
Stoneware Crystal glazes are
designed to expand upon the surface with dazzling bursts of color. Fired
results will vary based on wareâs orientation. Crystals will settle to the
bottom of the jar and will need a good mixing prior to initial use. Re-stir
between each coat. Stir with palette knife or other unpainted tool. Avoid
placing crystals near the bottom third of a vertical piece as they may cause
additional movement during firing. Crystals will flow more than the base glaze.
While the glaze is wet, use your fan brush to redistribute the crystals to
achieve balanced coverage. Over-application or heavy deposition of the crystals
can cause pin-holing or running. When storing a crystal glaze, you may consider
storing upside down to facilitate crystal dispersion on the next use.
Sophistication and
Reliability
Maycoâs
Stoneware glaze assortment, including Opals, Ices, and Washes, offers a variety
of finishes, textures and endless possibilities for glaze combinations.
Designed to perform from cones 5-10, in oxidation or reduction firing processes
on stoneware clay body of choice. Artists will appreciate the consistency of
performance and control of movement.
Mayco
stoneware glazes have a firing range of Cone 5-10. Always test your chosen
glaze combination before applying all over to piece.
Visit the Galleries page to see Cone 10 reduction results.
Maycoâs
Stoneware glazes are formulated to be friendly to the user in application,
layering and firing. Artists will find amazing glaze combinations to expand the
creative possibilities in the studio. Whether it is a pairing with a Mayco
Wash, one of our Clears or a complex surface like SW-127 Olivine, these
layering techniques will improve the work of any clay enthusiast.
General Use
Use
Mayco Stoneware Glazes on any midrange clay body. These glazes are intended for
use at cone range 4-6 but are also stable and pleasing at cone 10. Can be used
in oxidation, reduction or other alternative atmospheric firing conditions.
Always test prior to use.
For premixed products:
Stir
well. Apply to soft-fired bisque(cone 04/06). Apply one, two or three coats
depending on the result desired. Allow each coat to dry before applying the
next coat. Fire to cone 5/6.